Resin zippers are manufactured from POM (polyoxymethylene) via injection molding. Featuring smooth, color-rich teeth, they outperform metal and nylon zippers with balanced durability, waterproofing, and cost efficiency—making them the preferred choice for garments and luggage.
#3 Resin Zipper
Largeur des dents : 4,3 mm
Tape width (basic): 26 mm
#5 Resin Zipper
Teeth width: 5.5 mm
Tape width (basic): 32mm
#8 Resin Zipper
Teeth width: 7.1mm
Tape width (basic): 36 mm
#10 Resin Zipper
Teeth width: 8.3mm
Tape width (basic): 40 mm
#15 Resin Zipper
Teeth width: 9.8mm
Tape width (basic): 41 mm
#20 Resin Zipper
Teeth width: 12.9 mm
Tape width (basic): 50.5mm
#30 Resin Zipper
Teeth width: 20.1mm
Tape width (basic): 65mm
Il n’est pas précis pour l’ordinateur de comparer les couleurs car chaque couleur d’écran est différente et la luminosité est différente. If you are strict about nylon zipper tape color, it is recommended that you buy GCC zipper color card or Carte de couleurs Pantone.
The defining characteristic of an open-end resin zipper is its fully separable bottom, enabling complete detachment of both zipper chains.Use for the front of jackets, coats.
Closed-end resin zipper is characterized by its non-separable bottom stopper, where the zipper tapes are secured at the end with plastic bottom stopper. applied in pouch.
Two Way Open-End Resin Zipper Enables separation and adjustable length, Auto-lock slider prevents accidental release.Ideal for extended down coats.
The rotating auto-lock resin zipper features a 360° swivel puller and self-locking mechanism, used for effortless operation on reversible garments like down jackets and ski wear.
Zipper is divded to six major parts:top stopper,zipper tape,zipper teeth,bottom stopper,zipper slider and zipper puller.
An element which is fixed on top of the chain restricts sliders moving away.
It is a movable component which makes teeth close and open.
Teeth are made of metal or plastic; havecertain shapes after processing
An element which is fixed on the bottom of chain restricts sliders moving away.
It is a movable component which makes teeth close and open.
It is a part of slider which can be designed in all kinds of geometry shapes andconnects with slider through middle component to achieve zippers`on-off.
We have many kinds of resin zippers molds and use different molds can make the teeth of different shapes on the tape.The tape width above represents the basic tape width or can be customized according to the requirements of customers.
Vous pouvez envoyer des demandes pour obtenir des devis gratuits, des plans et des services exclusifs.
Nous vous répondrons à toutes vos questions dans les 24 heures.
Nous vous contacterons dans un délai d'un jour ouvrable, veuillez prêter attention à l'e-mail avec le suffixe « @zipper-factory.com ».
